Sanitary ware classification and installation and acceptance knowledge

Sanitary ware and sanitary ware are indispensable in life, and the quality of sanitary ware and sanitary ware will affect people's lives, so when you buy sanitary ware and sanitary ware, you will buy a better one, which is convenient for cleaning and more durable. Of course, brand products have become the first choice. The following introduces the classification of sanitary ware and bathroom and how to install and accept the sanitary ware and bathroom.

Sanitary ware classification

1. Bathtub

The bathtub material can be divided into: cast iron bathtub, steel bathtub, wooden bathtub. The cast iron bathtub is formed by forging with cast iron as the raw material; the steel bathtub is processed and formed with steel plate as the raw material; the wooden bathtub is made of cedar and the surface is plated with copper oil.

2. Shower room

The shower room uses tempered glass as the partition of the bath room. The main material of the frame is made of aluminum alloy. The shower room can be roughly divided into curvilinear, diamond, and arc shapes according to the shape.

3. Bathroom cabinet

The bathroom cabinet is used to store toiletries, and the top cabinet is made of composite laminated panels.

4. Toilet

The toilets are divided into structures: rear sewage toilets and lower sewage toilets. The sewage outlet of the rear sewage toilet is connected to the toilet on the wall reserved sewage outlet behind the toilet. The sewage outlet of the lower sewage toilet is under the toilet body, and is connected to the toilet on the floor reserved sewage outlet.

5. Basin

Basins are divided into three types: above counter basin, under counter basin and pedestal basin. The above counter basin is installed on the countertop, the upper edge of the basin body is above the countertop; while the under counter basin is installed on the countertop, the whole basin is below the countertop; the pedestal basin does not need to be installed on the countertop, and the bottom of the basin is supported by the column Wash basin.

How to install and accept sanitary ware

1. Bathtub

After filling the bathtub with water, check for leaks.

2. Floor drain

Splash water on the ground to see if the water flows to the floor drain and there is no residue.

3. Shower room

The appearance of the shower room should be clean and bright. The blocking door and the sliding door are parallel, vertical, and symmetrical. The two movable doors are easy to open and close, and they should be closed without any leaks

4. Toilet

Check whether the toilet pit distance is reasonable. If the pit distance is too small, the water tank enters the wall, the use and appearance will be affected; while the toilet distance is too large, there will be a large space between the toilet and the wall.

(Click on the link below to know more↓↓↓)

bath cabinets

bathroom vanity tops

freestanding bathroom furniture

24 bathroom vanity

modern bathroom vanities